Über uns

Publikationen

Materialdesign

Raether, F.: Ceramics Facing Competition with other Materials, Ceramic Applications, 4/2016, pp. 57-61.

Müller, Th.; Raether, F.: 3D modelling of ceramic composites and simulation of their electrical, thermal and elastic properties, Computational materials science, vol. 81, 2014, pp.205-211. (zum Abstract)

Iuga, M.; Raether, F.: FEM Simulations of Microstructure Effects on Thermoelastic Properties of Sintered Ceramics, Journal of the European Ceramic Society, 27, 2007, pp. 511-516. (zum Abstract)

Raether, F.; Iuga, M.: Effect of particle shape and arrangement on thermoelastic properties of porous ceramics, Journal of the European Ceramic Society, 26, 2006, pp.2653-2667. (zum Abstract)

Iuga, M.; Raether, F.: Simulation of the thermoelastic properties of sintered ceramics, Advances in Science and Technology, 45, 2006, pp.89-94. (zum Abstract)

Brockmann, D.; Staab, T.; Raether, F.: The influence of sintering additives on the microstructure and material properties of silicon nitride ceramics investigated by advanced simulation tools, Phys. Status Solidi A, 1600634, 2017, DOI 10.1002. (zum Abstract)

 

Auf Anfrage senden wir Ihnen unsere Veröffentlichungen gerne als PDF zu.

Keramik

Nöth, A.; Neubauer, G.: High Temperature Ceramics for Light-Weight Kiln Furniture, CFI Ceramic Forum International 94/2017, S. E24-E28.

Stepanyan, M.; Seifert, G.; Weiß, T.: Why not Using Ceramics – Trends from Ceramics Research, Ceramic applications 5/2017, p. 78-79.

Nöth, A.; Neubauer, G.: High Temperature Ceramics for Light-Weight Kiln Furniture, Ceramic applications 5/2017, p. 73-77.

Nöth, A.; Vogt, J.: High-temperature stable gas-tight sealings for plasma-sprayed ceramic components, Ceramic applications 2/2016, p. 66.

Raether, F.: Parameters for Inherently Homogeneous Sintering Processes, Adv. Eng. Mat., 17 (2015), pp. 1374 - 1382. (zum Abstract)

Schmitt, V.; Raether, F.: Effect of Cobalt Doping on the Sintering Mechanisms of the Lead-Free Piezoceramic (Bi0.5Na0.5)TiO3 , Journal of the European Ceramic Society, vol. 34, 2014, No.1, pp.15-21. (zum Abstract)

Raether, F.; Arefin, M.L.: Sintering kinetics of zinc oxide based varistor ceramics, Ceramics Int., 36, 2010, pp. 1429-1437.

Huang, X.; Raether, F.: Role of impurities in the sintering behaviour and properties of lead zirconate titanate ceramics, J. Am. Ceram. Soc. 92, 2009, pp. 2011-2016. (zum Abstract)

Arefin, M. L.; Raether, F.; Dolejš, D.; Klimera, A.: Phase formation during liquid phase sintering of ZnO ceramics, Ceramics Int., 35, 2009, pp. 3313-3320. (zum Abstract)

Thimm, A.; Raether, F.; Klimera, A.; Ruska, J.: Sintering of aluminium nitride substrates for the electronic industry. Special edition of Ceramic Forum international: Thermal process engineering in the ceramics industry; M. Herrmann, R. Clasen (eds.), Göller Verlag, Baden Baden, Germany, 2008, pp. 24-28.

Klimera, A.; Raether, F.; Ruska, J.: Improving Strength by Controlling Segregation in Liquid Phase Sintered Aluminium Nitride Ceramics, Journal of the European Ceramic Society, 27, 2007, pp.1419-1424. (zum Abstract)

 

Auf Anfrage senden wir Ihnen unsere Veröffentlichungen gerne als PDF zu.

Komposite

Shi, Y.; Hönig, S.; Frieß, M.; Rüdinger, A.; Pritzkow, W.; Koch, D.: Manufacture and characterization of oxide ceramic matrix composites out of commercial pre-impregnated fabrics, Ceramics International, 44 (2018), 2320–2327. (zum Abstract)

Klemm, H.; Kunz, W.; Wamser, T.; Rüdinger, A.; Weiß, R.; Lauer, A.; Wilhelmi, C.; Machry, T.; Hofmann, S.; Koch, D.: Hot Gas Stability of Various Ceramic Matrix Composites, Advances in High Temperature Ceramic Matrix Compo sites and Materials for Sustainable Development; Ceramic Transactions, Volume CCLXIII, Juli 2017, S. 253-260. (zum Abstract)

Potzernheim-Zenkel, C.; Kühl, H.; Rüdinger, A.: Technische Keramiken - Werkstoffe für extreme Bedingungen, DGM im Blickpunkt - Hochleistungskeramik, Mai 2017, S. 6-9.

Konschak, A.; Mahr, J.; Schulte, R.; Schmidt, J.: Energieeffiziente Herstellung von C/C-SiC-Bauteilen mittels induktiv beheiztem modularem Schnellsintersystem, CFI Ceramic Forum International 10/2016, S. D16-D20.

Nöth, A.; Rüdinger, A.; Pritzkow, W.: Oxide Ceramic Matrix Composites – Manufacturing, Machining, Properties and Industrial Applications, Ceramic applications 3/2015, pp. 48-54.

Nöth, A.: Fabrication of large diameter SiC monofilaments by polymer route, Journal of the European Ceramic Society, Volume 34, Issue 6, 2014, pp. 1487-1492. (zum Abstract)

Raether, F.: Ceramic Matrix Composites – an Alternative for Challenging Construction Tasks, Ceramic applications 1/2013, pp. 45-49.

Rüdinger, A.; Pritzkow, W.: Die Entwicklung oxidkeramischer Faserverbundwerkstoffe am Fraunhofer ISC / Zentrum HTL in Zusammenarbeit mit W.E.C. Pritzkow Spezialkeramik, Keram. Z. 65, 2013, [3] pp.166-169. (zum Abstract)

Nöth, A.; Hietel, D.; Rothmann, M.: Development and upscaling of spinning processes for ceramic high-tech fiber production, Chemical Fibers International 1/13, 2013, pp. 42-43.

Sha, J.; Hausherr, J. M.; Mucha, H.; Konschak, A.; Krenkel, W.: Microstructure Changes Caused by the Interaction of Fiber-Matrix during the Carbonization, High Temperature Ceramic Materials and Composites (Editors W. Krenkel, J. Lamon), AVISO Verlagsgesellschaft mbH, Berlin, 2010, pp. 143-148.

Hausherr, J. M.; Koch, C.; Krause, M.; Herrmann, C.; Krenkel, W.: Correlation Between Fiber Orientation and Mechanical Properties of Short-Fiber C/C Composites, High Temperature Ceramic Materials and Composites (Editors W. Krenkel, J. Lamon), AVISO Verlagsgesellschaft mbH, Berlin, 2010, pp. 289-295.

Sha, J.; Hausherr, J. M.; Konschak, A.; Krenkel, W.: The Influence of Thermal Treatment of Carbon Fibers on the Interfacial Shear Strength during the Pyrolysis of CFRP to C/C Composites, Proc. of the 11th Int. Conf. of the Europ. Ceram. Soc., Krakow, Poland, 2009, pp. 524-530.

 

Auf Anfrage senden wir Ihnen unsere Veröffentlichungen gerne als PDF zu.

Bauteilfertigung

Gadelmeier, C.; Schmidt, J.: Joining of Ceramic an Metal parts, Ceramic applications 5/2017, pp 59-66.

Nachum, S.; Vogt, J.; Raether, F.: Additive Manufacturing of Ceramics: Stereolithography versus Binder Jetting, CFI Ceramic Forum International, 3/2016, S. E27 ff..

Gadelmeier, C.; Schmidt, J.; Göthe, M.; Jovanovic, D.; Zietkowski, M.; Eckardt, C.; Gorywoda, M.: Adhesive Bonding of Oxide Ceramics for Complexe Ceramic Parts in High Temperature Furnaces, Advances in Science and Technology (paper has been accepted for 20th Symposium July 2014, Wien). (zum Abstract)

Gadelmeier, C.; Schmidt, J.; Göthe, M.; Jovanovic, D.: Characterization of Furnace Sintered Mullite and Oxide Ceramic Matrix Composites (O-CMC) by Using Glass Solders, Advances in Science and Technology, Vol. 88, 2014, S.162 ff. (zum Abstract)

Baber, J.; Raether, F.: Production of oxide ceramic coatings on glass by laser sintering, Glastechn. Ber. Glass Sci. Technol., 73 (2000), pp. 211-215. (zum Abstract)

 

Auf Anfrage senden wir Ihnen unsere Veröffentlichungen gerne als PDF zu.

Wärmeprozesse

Raether, F.: EnerTHERM – a Joint Effort for Energy and Cost Efficient Heat Treatments, CFI Ceramic Forum International, 5-6/2015, S. E37 ff.

Raether, F.: The kinetic field - a versatile tool for prediction and analysis of heating processes, High Temperatures-High Pressures , 42.4 (2013), pp. 303-319. (zum Abstract)

Raether, F. (Hrsg.): Energieeffizienz bei der Keramikherstellung, ISBN 978-3-8163-0644-3, VDMA-Verlag, Frankfurt, Germany (2013).

Raether, F.: Energy efficiency during production of ceramics, CFI Ceramic Forum International 10/2013, S. E27 ff.

Raether, F.: Energy and cost reduction with heat treatment of ceramics, CFI Ceramic Forum International  88/2011, No 6/7, S. E43 ff.

Hausherr, J. M.; Meinhardt, J.; Hassink, B.; Herrmann, C.; Daimer, J.; Raether, G.; Krenkel, W.: In-Situ-Measurement of the Si-Infiltration Process of C/C-Preforms and 3-D Analysis of the Resulting C/SiC Microstructure, Proc. of the 11th Int. Conf. of the Europ. Ceram. Soc., Krakow, Poland, 2009, pp. 536-543.

Raether, F.; Schulze Horn, P.: Investigation of sintering mechanism of alumina using kinetic field and master sintering diagrams, J. Eur. Ceramic Soc. 29, 2009, pp. 2225-2234. (zum Abstract)

Raether, F.; Klimera, A.: Methods of measurement and strategies for binder removal in ceramics. Special edition of Ceramic Forum international: Thermal process engineering in the ceramics industry, M. Herrmann, R. Clasen (eds.), Göller Verlag, Baden Baden, Germany, 2008, pp. 5-11.

Raether, F.; Klimera, A.; Baber, J.: In-Situ Measurement and Simulation of Temperature and Stress Gradients during Sintering of Large Ceramic Components, Ceramics International, 34 , 2007, pp.385-389. (zum Abstract)

Klimera, A.; Raether, F.; Schulze Horn, P.: In Situ Investigation of debinding of non-oxide ceramic, Advances in Science and Technology, 45, 2006, pp.1684-1689. (zum Abstract)

Raether, F.; Springer, R.: In-Situ measurement of neck formation during sintering of alumina by a novel thermooptical measuring device, Advanced Engineering Materials, 2 (2000), pp. 741-744. (zum Abstract)

 

Auf Anfrage senden wir Ihnen unsere Veröffentlichungen gerne als PDF zu.

Hochtemperatur-Charakterisierung

Brendel, H.; Seifert, G.; Raether. F.: Approximative Derivation of the Extinction Efficiency for Stratified Cylinders, Optics Communications 391 (2017), pp. 141-147. (zum Abstract)

Brendel, H.; Seifert, G.; Raether. F.: Determination of thermal diffusivity of fibrous insulating materials at high temperatures by thermal wave analysis, Int. J. Heat & Mass Transfer 108, Part B (2017), pp. 2514-2522. (zum Abstract)

Brendel, H.; Seifert, G.; Raether, F.: Heat Transfer Properties of Hollow Fiber Insulation Materials at High Temperatures, Journal of Thermophysics and Heat Transfer, August 26, 2016. (zum Abstract)

Seifert, G.; Schmitt, V.; Raether, F.: New Techniques for the Determination of Refractory Material Properties at High Temperatures, refractories worldforum rwf 3/2015, S.77 ff.

Müller, T. M.; Meinhardt, J., Raether, F.: Impedance spectroscopy on ceramic materials at high temperatures, considering stray fields and electromagnetic noise, Rev. Sci. Instrum. 84 (2013), 015118.

Raether, F.: Current state of in-situ measuring methods for the control of firing processes. J. Am. Ceram. Soc. 92, 2009, pp. 146-152.
(zum Abstract)

Baber, J.; Klimera, A.; Raether, F.: In situ measurement of dimensional changes and temperature fields during sintering with a novel thermooptical measuring device, J. Eur. Ceramic Soc., 27, 2007, pp. 701-705. (zum Abstract)

Raether, F.; Meinhardt, J.; Kienzle, A.: Oxidation Behaviour of Carbon Short Fibre Reinforced C/SiC Composites, J. Eur. Ceram. Soc., 27 (2007), pp. 1217-1221. (zum Abstract)

Meinhardt, J.; Woyke, T.; Raether, F.; Kienzle, A.: Measurement and simulation of the oxidation of carbon fibers and C/SiC ceramic, Advances in Science and Technology, 45, 2006, pp.1489-1494. (zum Abstract)

Springer, R.; Raether, F.; Caps, R.; Manara, J.: In Situ Measurement of Light Scattering in Porous Ceramics During Sintering. High Temperatures  - High Pressures, 2 (2000), pp. 385-390.

Raether, F.; Springer, R.; Beyer, St.: Optical dilatometry for the control of microstructure development during sintering, Mat. Res. Innovations, 4 (2001), pp. 245-250.

 

Auf Anfrage senden wir Ihnen unsere Veröffentlichungen gerne als PDF zu.

Werkstoffprüfung

Hausherr, J. M.1; Eitel M.1; Krenkel, W.: Determination of Material Properties for Short Fibre Reinforced C/C-SiC, Proceedingsband des Workshop on Testing and Modelling Ceramic and Carbon Matrix Composites (WCMC 2014). (zum Abstract)

A. Neubrand, A.1; Hausherr, J. M.2; Lauer, A.3; Weiss, R.3; Wilhelmi, C.4: Investigation of cutting-induced damage in CMC bend bars, Proceedingsband des Workshop on Testing and Modelling Ceramic and Carbon Matrix Composites (WCMC 2014). (zum Abstract)

Hausherr, J. M.; Herrmann, C.; Spatz, C.; Krenkel, W.: Qualitative und quantitative mikrostrukturelle Untersuchungen der Werkstoffe bei der Herstellung von C/SiC-Hochleistungskeramiken mittels Computertomografie, Verbundwerkstoffe (Editor: W. Krenkel), WILEY-VCH Weinheim, Germany, 2009, pp. 233-240. (zum Abstract)

Herrmann, C.; Hausherr, J. M.; Krenkel, W.: Einsatz der Computertomografie zur zerstörungsfreien Prüfung und Charakterisierung von Faserverbundwerkstoffen, Verbundwerkstoffe (Editor: W. Krenkel), WILEY-VCH Weinheim, Germany, 2009, pp. 249-256. (zum Abstract)

Hausherr, J. M.; Krenkel, W.: Non-Destructive Testing Techniques for CMC Materials, Ceramic Matrix Comp. (Editor: W. Krenkel), WILEY-VCH Weinheim, Germany, 2008, pp. 261-285. (zum Abstract)

 

Auf Anfrage senden wir Ihnen unsere Veröffentlichungen gerne als PDF zu.

Abschlussbericht zum Projekt ENITEC

Energieeffizienz bei der Keramikherstellung, Abschlussbericht Projekt ENITEC, VDMA Verlag, Frankfurt am Main, 2013, ISBN 978-3-8163-0644-3.

Das könnte Sie auch interessieren